# Makefile.in generated by automake 1.17 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2024 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Copyright (C) 2002, 2004 Free Software Foundation, Inc.
#
# This file is part of GnuPG.
#
# GnuPG is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# GnuPG is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see <https://www.gnu.org/licenses/>.

# cmacros.am - C macro definitions
#     Copyright (C) 2004 Free Software Foundation, Inc.
#
# This file is part of GnuPG.
#
# GnuPG is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# GnuPG is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see <https://www.gnu.org/licenses/>.

VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
am__rm_f = rm -f $(am__rm_f_notfound)
am__rm_rf = rm -rf $(am__rm_f_notfound)
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
@HAVE_DOSISH_SYSTEM_FALSE@am__append_1 = -DGNUPG_BINDIR="\"$(bindir)\""            \
@HAVE_DOSISH_SYSTEM_FALSE@               -DGNUPG_LIBEXECDIR="\"$(libexecdir)\""    \
@HAVE_DOSISH_SYSTEM_FALSE@               -DGNUPG_LIBDIR="\"$(libdir)/@PACKAGE@\""  \
@HAVE_DOSISH_SYSTEM_FALSE@               -DGNUPG_DATADIR="\"$(datadir)/@PACKAGE@\"" \
@HAVE_DOSISH_SYSTEM_FALSE@               -DGNUPG_SYSCONFDIR="\"$(sysconfdir)/@PACKAGE@\"" \
@HAVE_DOSISH_SYSTEM_FALSE@               -DGNUPG_LOCALSTATEDIR="\"$(localstatedir)\""


# If a specific protect tool program has been defined, pass its name
# to cc.  Note that these macros should not be used directly but via
# the gnupg_module_name function.
@GNUPG_AGENT_PGM_TRUE@am__append_2 = -DGNUPG_DEFAULT_AGENT="\"@GNUPG_AGENT_PGM@\""
@GNUPG_PINENTRY_PGM_TRUE@am__append_3 = -DGNUPG_DEFAULT_PINENTRY="\"@GNUPG_PINENTRY_PGM@\""
@GNUPG_SCDAEMON_PGM_TRUE@am__append_4 = -DGNUPG_DEFAULT_SCDAEMON="\"@GNUPG_SCDAEMON_PGM@\""
@GNUPG_TPM2DAEMON_PGM_TRUE@am__append_5 = -DGNUPG_DEFAULT_TPM2DAEMON="\"@GNUPG_TPM2DAEMON_PGM@\""
@GNUPG_DIRMNGR_PGM_TRUE@am__append_6 = -DGNUPG_DEFAULT_DIRMNGR="\"@GNUPG_DIRMNGR_PGM@\""
@GNUPG_PROTECT_TOOL_PGM_TRUE@am__append_7 = -DGNUPG_DEFAULT_PROTECT_TOOL="\"@GNUPG_PROTECT_TOOL_PGM@\""
@GNUPG_DIRMNGR_LDAP_PGM_TRUE@am__append_8 = -DGNUPG_DEFAULT_DIRMNGR_LDAP="\"@GNUPG_DIRMNGR_LDAP_PGM@\""
subdir = doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
	$(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/gettext.m4 \
	$(top_srcdir)/m4/gpg-error.m4 $(top_srcdir)/m4/iconv.m4 \
	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/ksba.m4 \
	$(top_srcdir)/m4/lcmessage.m4 $(top_srcdir)/m4/ldap.m4 \
	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libassuan.m4 \
	$(top_srcdir)/m4/libgcrypt.m4 $(top_srcdir)/m4/nls.m4 \
	$(top_srcdir)/m4/npth.m4 $(top_srcdir)/m4/ntbtls.m4 \
	$(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \
	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/readline.m4 \
	$(top_srcdir)/m4/socklen.m4 $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(dist_pkgdata_DATA) \
	$(nobase_dist_doc_DATA) $(am__DIST_COMMON)
mkinstalldirs = $(SHELL) $(top_srcdir)/build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
am__v_DVIPS_0 = @echo "  DVIPS   " $@;
am__v_DVIPS_1 = 
AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
am__v_MAKEINFO_0 = @echo "  MAKEINFO" $@;
am__v_MAKEINFO_1 = 
AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
am__v_INFOHTML_0 = @echo "  INFOHTML" $@;
am__v_INFOHTML_1 = 
AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
am__v_TEXI2DVI_0 = @echo "  TEXI2DVI" $@;
am__v_TEXI2DVI_1 = 
AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
am__v_TEXI2PDF_0 = @echo "  TEXI2PDF" $@;
am__v_TEXI2PDF_1 = 
AM_V_texinfo = $(am__v_texinfo_@AM_V@)
am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
am__v_texinfo_0 = -q
am__v_texinfo_1 = 
AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
am__v_texidevnull_0 = > /dev/null
am__v_texidevnull_1 = 
INFO_DEPS = $(srcdir)/gnupg.info
TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex
am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux
DVIS = gnupg.dvi
PDFS = gnupg.pdf
PSS = gnupg.ps
HTMLS = gnupg.html
TEXINFOS = gnupg.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \
	"$(DESTDIR)$(man7dir)" "$(DESTDIR)$(man8dir)" \
	"$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(docdir)"
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
  || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
       $(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \
  }
man1dir = $(mandir)/man1
man7dir = $(mandir)/man7
man8dir = $(mandir)/man8
NROFF = nroff
MANS = $(man_MANS)
DATA = $(dist_pkgdata_DATA) $(nobase_dist_doc_DATA)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
am__DIST_COMMON = $(gnupg_TEXINFOS) $(srcdir)/Makefile.in \
	$(top_srcdir)/am/cmacros.am \
	$(top_srcdir)/build-aux/mkinstalldirs \
	$(top_srcdir)/build-aux/texinfo.tex
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
AWK_HEX_NUMBER_OPTION = @AWK_HEX_NUMBER_OPTION@
BUILD_FILEVERSION = @BUILD_FILEVERSION@
BUILD_HOSTNAME = @BUILD_HOSTNAME@
BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
BUILD_REVISION = @BUILD_REVISION@
BUILD_TIMESTAMP = @BUILD_TIMESTAMP@
BUILD_VERSION = @BUILD_VERSION@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CC_FOR_BUILD = @CC_FOR_BUILD@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DL_LIBS = @DL_LIBS@
DNSLIBS = @DNSLIBS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
ENCFS = @ENCFS@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
FUSERMOUNT = @FUSERMOUNT@
GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
GNUPG_AGENT_PGM = @GNUPG_AGENT_PGM@
GNUPG_DIRMNGR_LDAP_PGM = @GNUPG_DIRMNGR_LDAP_PGM@
GNUPG_DIRMNGR_PGM = @GNUPG_DIRMNGR_PGM@
GNUPG_KEYBOXD_PGM = @GNUPG_KEYBOXD_PGM@
GNUPG_PINENTRY_PGM = @GNUPG_PINENTRY_PGM@
GNUPG_PROTECT_TOOL_PGM = @GNUPG_PROTECT_TOOL_PGM@
GNUPG_SCDAEMON_PGM = @GNUPG_SCDAEMON_PGM@
GNUPG_TPM2DAEMON_PGM = @GNUPG_TPM2DAEMON_PGM@
GPGKEYS_LDAP = @GPGKEYS_LDAP@
GPGRT_CONFIG = @GPGRT_CONFIG@
GPG_ERROR_CFLAGS = @GPG_ERROR_CFLAGS@
GPG_ERROR_CONFIG = @GPG_ERROR_CONFIG@
GPG_ERROR_LIBS = @GPG_ERROR_LIBS@
GPG_ERROR_MT_CFLAGS = @GPG_ERROR_MT_CFLAGS@
GPG_ERROR_MT_LIBS = @GPG_ERROR_MT_LIBS@
HAVE_LIBTSS = @HAVE_LIBTSS@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
KSBA_CFLAGS = @KSBA_CFLAGS@
KSBA_CONFIG = @KSBA_CONFIG@
KSBA_LIBS = @KSBA_LIBS@
LBER_LIBS = @LBER_LIBS@
LDAPLIBS = @LDAPLIBS@
LDAP_CPPFLAGS = @LDAP_CPPFLAGS@
LDFLAGS = @LDFLAGS@
LIBASSUAN_CFLAGS = @LIBASSUAN_CFLAGS@
LIBASSUAN_CONFIG = @LIBASSUAN_CONFIG@
LIBASSUAN_LIBS = @LIBASSUAN_LIBS@
LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@
LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@
LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@
LIBGNUTLS_CFLAGS = @LIBGNUTLS_CFLAGS@
LIBGNUTLS_LIBS = @LIBGNUTLS_LIBS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBREADLINE = @LIBREADLINE@
LIBS = @LIBS@
LIBTSS_CFLAGS = @LIBTSS_CFLAGS@
LIBTSS_LIBS = @LIBTSS_LIBS@
LIBUSB_CPPFLAGS = @LIBUSB_CPPFLAGS@
LIBUSB_LIBS = @LIBUSB_LIBS@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
NETLIBS = @NETLIBS@
NPTH_CFLAGS = @NPTH_CFLAGS@
NPTH_CONFIG = @NPTH_CONFIG@
NPTH_LIBS = @NPTH_LIBS@
NTBTLS_CFLAGS = @NTBTLS_CFLAGS@
NTBTLS_CONFIG = @NTBTLS_CONFIG@
NTBTLS_LIBS = @NTBTLS_LIBS@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_GT = @PACKAGE_GT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
POSUB = @POSUB@
RANLIB = @RANLIB@
SENDMAIL = @SENDMAIL@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SQLITE3_CFLAGS = @SQLITE3_CFLAGS@
SQLITE3_LIBS = @SQLITE3_LIBS@
STRIP = @STRIP@
SWTPM = @SWTPM@
SYSROOT = @SYSROOT@
TPMSERVER = @TPMSERVER@
TSSSTARTUP = @TSSSTARTUP@
TSS_INCLUDE = @TSS_INCLUDE@
USE_C99_CFLAGS = @USE_C99_CFLAGS@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
W32SOCKLIBS = @W32SOCKLIBS@
WINDRES = @WINDRES@
XGETTEXT = @XGETTEXT@
XGETTEXT_015 = @XGETTEXT_015@
XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
YAT2M = @YAT2M@
ZLIBS = @ZLIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__rm_f_notfound = @am__rm_f_notfound@
am__tar = @am__tar@
am__untar = @am__untar@
am__xargs_n = @am__xargs_n@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = $(datadir)/locale
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@

# NB: AM_CFLAGS may also be used by tools running on the build
# platform to create source files.
AM_CPPFLAGS = -DLOCALEDIR=\"$(localedir)\" $(am__append_1) \
	$(am__append_2) $(am__append_3) $(am__append_4) \
	$(am__append_5) $(am__append_6) $(am__append_7) \
	$(am__append_8)
resource_objs = 

# Convenience macros
libcommon = ../common/libcommon.a
libcommonpth = ../common/libcommonpth.a
libcommontls = ../common/libcommontls.a
libcommontlsnpth = ../common/libcommontlsnpth.a
examples = examples/README examples/scd-event examples/trustlist.txt	\
           examples/qualified.txt                                       \
	   examples/common.conf                                         \
           examples/gpgconf.rnames examples/gpgconf.conf                \
	   examples/pwpattern.list

helpfiles = help.txt help.be.txt help.ca.txt help.cs.txt		\
            help.da.txt help.de.txt help.el.txt help.eo.txt		\
            help.es.txt help.et.txt help.fi.txt help.fr.txt		\
            help.gl.txt help.hu.txt help.id.txt help.it.txt		\
            help.ja.txt help.nb.txt help.pl.txt help.pt.txt		\
            help.pt_BR.txt help.ro.txt help.ru.txt help.sk.txt		\
            help.sv.txt help.tr.txt help.zh_CN.txt help.zh_TW.txt       \
            mail-tube.txt mail-tube.de.txt \
            wks-utils.txt wks-utils.de.txt

EXTRA_DIST = samplekeys.asc mksamplekeys com-certs.pem \
	     gnupg-logo.pdf gnupg-logo.png gnupg-logo-tr.png \
	     gnupg-module-overview.png gnupg-module-overview.pdf \
             gnupg-card-architecture.png gnupg-card-architecture.pdf \
             FAQ gnupg7.texi mkdefsinc.c defsincdate \
             opt-homedir.texi see-also-note.texi specify-user-id.texi \
	     gpgv.texi ChangeLog-2011 whats-new-in-2.1.txt \
             trust-values.texi keyformat.txt

BUILT_SOURCES = gnupg-module-overview.png gnupg-module-overview.pdf \
                gnupg-card-architecture.png gnupg-card-architecture.pdf \
                defsincdate defs.inc

info_TEXINFOS = gnupg.texi
dist_pkgdata_DATA = $(helpfiles)
nobase_dist_doc_DATA = FAQ DETAILS HACKING DCO TRANSLATE OpenPGP KEYSERVER \
                       $(examples)


#dist_html_DATA =
gnupg_TEXINFOS = \
	gpg.texi gpgsm.texi gpg-agent.texi scdaemon.texi instguide.texi \
	tools.texi debugging.texi glossary.texi contrib.texi gpl.texi \
	sysnotes.texi dirmngr.texi wks.texi gpg-card.texi \
        gnupg-module-overview.svg \
        gnupg-card-architecture.fig \
	howtos.texi howto-create-a-server-cert.texi

DVIPS = TEXINPUTS="$(srcdir)$(PATH_SEPARATOR)$$TEXINPUTS" dvips
AM_MAKEINFOFLAGS = -I $(srcdir) --css-ref=/share/site.css
YAT2M_OPTIONS = -I $(srcdir) \
        --release "GnuPG @PACKAGE_VERSION@" --source "GNU Privacy Guard 2.6"

myman_sources = gnupg7.texi gpg.texi gpgsm.texi gpg-agent.texi \
	        dirmngr.texi scdaemon.texi tools.texi wks.texi \
                gpg-card.texi

myman_pages = gpg.1 gpgv.1 gpgsm.1 gpg-agent.1 dirmngr.8 scdaemon.1 \
                watchgnupg.1 gpgconf.1 addgnupghome.8 gpg-preset-passphrase.1 \
		gpg-connect-agent.1 gpgparsemail.1 gpgtar.1 gpg-mail-tube.1 \
		applygnupgdefaults.8 gpg-wks-client.1 gpg-wks-server.1 \
		dirmngr-client.1 gpg-card.1 gpg-check-pattern.1

myhtmlman_pages = \
                gpg.1.html gpgv.1.html gpgsm.1.html \
                gpg-agent.1.html dirmngr.8.html scdaemon.1.html \
                watchgnupg.1.html gpgconf.1.html addgnupghome.8.html \
                gpg-preset-passphrase.1.html \
		gpg-connect-agent.1.html gpgparsemail.1.html \
                gpgtar.1.html gpg-mail-tube.1.html \
		applygnupgdefaults.8.html gpg-wks-client.1.html \
                gpg-wks-server.1.html \
		dirmngr-client.1.html gpg-card.1.html gpg-check-pattern.1.html \
		gnupg.7.html

man_MANS = $(myman_pages) gnupg.7
watchgnupg_SOURCE = gnupg.texi
CLEANFILES = mkdefsinc defs.inc
DISTCLEANFILES = gnupg.tmp gnupg.ops yat2m-stamp.tmp yat2m-stamp \
		 $(myman_pages) gnupg.7 $(myhtmlman_pages)

all: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) all-am

.SUFFIXES:
.SUFFIXES: .dvi .eps .fig .html .info .jpg .o .pdf .png .ps .rc .svg .texi
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/am/cmacros.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu doc/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
	esac;
$(top_srcdir)/am/cmacros.am $(am__empty):

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

.texi.info:
	$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	am__cwd=`pwd` && $(am__cd) $(srcdir) && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	cd "$$am__cwd"; \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ $<; \
	then \
	  rc=0; \
	  $(am__cd) $(srcdir); \
	else \
	  rc=$$?; \
	  $(am__cd) $(srcdir) && \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

.texi.dvi:
	$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) $(AM_TEXI2FLAGS) -I $(srcdir) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
	$<

.texi.pdf:
	$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) $(AM_TEXI2FLAGS) -I $(srcdir) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
	$<

.texi.html:
	$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
	$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) $<; \
	then \
	  rm -rf $@ && mv $(@:.html=.htp) $@; \
	else \
	  rm -rf $(@:.html=.htp); exit 1; \
	fi
$(srcdir)/gnupg.info: gnupg.texi $(gnupg_TEXINFOS)
gnupg.dvi: gnupg.texi $(gnupg_TEXINFOS)
gnupg.pdf: gnupg.texi $(gnupg_TEXINFOS)
gnupg.html: gnupg.texi $(gnupg_TEXINFOS)
.dvi.ps:
	$(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	$(DVIPS) $(AM_V_texinfo) -o $@ $<

uninstall-dvi-am:
	@$(NORMAL_UNINSTALL)
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
	done

uninstall-html-am:
	@$(NORMAL_UNINSTALL)
	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
	done

uninstall-info-am:
	@$(PRE_UNINSTALL)
	@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

uninstall-pdf-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
	done

uninstall-ps-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
	done

dist-info: $(INFO_DEPS)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  case $$base in \
	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
	    if test -f $$file; then \
	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	      test -f "$(distdir)/$$relfile" || \
		cp -p $$file "$(distdir)/$$relfile"; \
	    else :; fi; \
	  done; \
	done

mostlyclean-aminfo:
	-$(am__rm_rf) gnupg.t2d gnupg.t2p

clean-aminfo:
	-$(am__rm_rf) gnupg.dvi gnupg.pdf gnupg.ps gnupg.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done
install-man1: $(man_MANS)
	@$(NORMAL_INSTALL)
	@list1=''; \
	list2='$(man_MANS)'; \
	test -n "$(man1dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.1[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
install-man7: $(man_MANS)
	@$(NORMAL_INSTALL)
	@list1=''; \
	list2='$(man_MANS)'; \
	test -n "$(man7dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man7dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man7dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.7[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^7][0-9a-z]*$$,7,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man7dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man7dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man7dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man7dir)" || exit $$?; }; \
	done; }

uninstall-man7:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man7dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.7[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^7][0-9a-z]*$$,7,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man7dir)'; $(am__uninstall_files_from_dir)
install-man8: $(man_MANS)
	@$(NORMAL_INSTALL)
	@list1=''; \
	list2='$(man_MANS)'; \
	test -n "$(man8dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.8[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
	done; }

uninstall-man8:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man8dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.8[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
install-dist_pkgdataDATA: $(dist_pkgdata_DATA)
	@$(NORMAL_INSTALL)
	@list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \
	done

uninstall-dist_pkgdataDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)
install-nobase_dist_docDATA: $(nobase_dist_doc_DATA)
	@$(NORMAL_INSTALL)
	@list='$(nobase_dist_doc_DATA)'; test -n "$(docdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
	fi; \
	$(am__nobase_list) | while read dir files; do \
	  xfiles=; for file in $$files; do \
	    if test -f "$$file"; then xfiles="$$xfiles $$file"; \
	    else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
	  test -z "$$xfiles" || { \
	    test "x$$dir" = x. || { \
	      echo " $(MKDIR_P) '$(DESTDIR)$(docdir)/$$dir'"; \
	      $(MKDIR_P) "$(DESTDIR)$(docdir)/$$dir"; }; \
	    echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(docdir)/$$dir'"; \
	    $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(docdir)/$$dir" || exit $$?; }; \
	done

uninstall-nobase_dist_docDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nobase_dist_doc_DATA)'; test -n "$(docdir)" || list=; \
	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
	dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
tags TAGS:

ctags CTAGS:

cscope cscopelist:

distdir: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) distdir-am

distdir-am: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-info dist-hook
check-am: all-am
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-am
all-am: Makefile $(INFO_DEPS) $(MANS) $(DATA)
installdirs:
	for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man7dir)" "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(docdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-am
install-exec: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:
	-$(am__rm_f) $(CLEANFILES)

distclean-generic:
	-$(am__rm_f) $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
	-$(am__rm_f) $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-$(am__rm_f) $(BUILT_SOURCES)
clean: clean-am

clean-am: clean-aminfo clean-generic mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am: $(DVIS)

html: html-am

html-am: $(HTMLS)

info: info-am

info-am: $(INFO_DEPS)

install-data-am: install-dist_pkgdataDATA install-info-am install-man \
	install-nobase_dist_docDATA

install-dvi: install-dvi-am

install-dvi-am: $(DVIS)
	@$(NORMAL_INSTALL)
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
	done
install-exec-am:

install-html: install-html-am

install-html-am: $(HTMLS)
	@$(NORMAL_INSTALL)
	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  $(am__strip_dir) \
	  d2=$$d$$p; \
	  if test -d "$$d2"; then \
	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
	    echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
	  else \
	    list2="$$list2 $$d2"; \
	  fi; \
	done; \
	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
	done; }
install-info: install-info-am

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
	fi; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      echo "$$ifile"; \
	    else : ; fi; \
	  done; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
	@$(POST_INSTALL)
	@if $(am__can_run_installinfo); then \
	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man: install-man1 install-man7 install-man8

install-pdf: install-pdf-am

install-pdf-am: $(PDFS)
	@$(NORMAL_INSTALL)
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-am

install-ps-am: $(PSS)
	@$(NORMAL_INSTALL)
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic

pdf: pdf-am

pdf-am: $(PDFS)

ps: ps-am

ps-am: $(PSS)

uninstall-am: uninstall-dist_pkgdataDATA uninstall-dvi-am \
	uninstall-html-am uninstall-info-am uninstall-man \
	uninstall-nobase_dist_docDATA uninstall-pdf-am uninstall-ps-am

uninstall-man: uninstall-man1 uninstall-man7 uninstall-man8

.MAKE: all check install install-am install-exec install-strip

.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
	cscopelist-am ctags-am dist-hook dist-info distclean \
	distclean-generic distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am \
	install-dist_pkgdataDATA install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-man1 \
	install-man7 install-man8 install-nobase_dist_docDATA \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-aminfo \
	maintainer-clean-generic mostlyclean mostlyclean-aminfo \
	mostlyclean-generic pdf pdf-am ps ps-am tags-am uninstall \
	uninstall-am uninstall-dist_pkgdataDATA uninstall-dvi-am \
	uninstall-html-am uninstall-info-am uninstall-man \
	uninstall-man1 uninstall-man7 uninstall-man8 \
	uninstall-nobase_dist_docDATA uninstall-pdf-am uninstall-ps-am

.PRECIOUS: Makefile


@HAVE_W32_SYSTEM_TRUE@.rc.o:
@HAVE_W32_SYSTEM_TRUE@	$(WINDRES) $(DEFAULT_INCLUDES) $(INCLUDES) "$<" "$@"

gnupg.texi : defs.inc

mkdefsinc: mkdefsinc.c Makefile ../config.h
	$(CC_FOR_BUILD) -I. -I.. -I$(srcdir) $(AM_CPPFLAGS) \
                        -o $@ $(srcdir)/mkdefsinc.c

@MAINTAINER_MODE_TRUE@.svg.eps:
@MAINTAINER_MODE_TRUE@	convert `test -f '$<' || echo '$(srcdir)/'`$< $@

@MAINTAINER_MODE_TRUE@.svg.png:
@MAINTAINER_MODE_TRUE@	convert `test -f '$<' || echo '$(srcdir)/'`$< $@

@MAINTAINER_MODE_TRUE@.svg.pdf:
@MAINTAINER_MODE_TRUE@	convert `test -f '$<' || echo '$(srcdir)/'`$< $@

@MAINTAINER_MODE_TRUE@.fig.png:
@MAINTAINER_MODE_TRUE@	fig2dev -L png `test -f '$<' || echo '$(srcdir)/'`$< $@

@MAINTAINER_MODE_TRUE@.fig.jpg:
@MAINTAINER_MODE_TRUE@	fig2dev -L jpeg `test -f '$<' || echo '$(srcdir)/'`$< $@

@MAINTAINER_MODE_TRUE@.fig.eps:
@MAINTAINER_MODE_TRUE@	fig2dev -L eps `test -f '$<' || echo '$(srcdir)/'`$< $@

@MAINTAINER_MODE_TRUE@.fig.pdf:
@MAINTAINER_MODE_TRUE@	fig2dev -L pdf `test -f '$<' || echo '$(srcdir)/'`$< $@

yat2m-stamp: $(myman_sources) defs.inc
	@rm -f yat2m-stamp.tmp
	@touch yat2m-stamp.tmp
	incd="`test -f defsincdate || echo '$(srcdir)/'`defsincdate"; \
	for file in $(myman_sources); do \
              $(YAT2M) $(YAT2M_OPTIONS) --store \
                  --date "`cat $$incd 2>/dev/null`" \
	          `test -f '$$file' || echo '$(srcdir)/'`$$file ;\
              $(YAT2M) $(YAT2M_OPTIONS) --store --html --gnupgorg \
                  --date "`cat $$incd 2>/dev/null`" \
	          `test -f '$$file' || echo '$(srcdir)/'`$$file ;\
        done
	@mv -f yat2m-stamp.tmp $@

$(myman_pages) $(myhtmlman_pages) gnupg.7 : yat2m-stamp defs.inc
	@if test -f $@; then :; else \
            trap 'rm -rf yat2m-stamp yat2m-lock' 1 2 13 15; \
               if mkdir yat2m-lock 2>/dev/null; then \
                 rm -f yat2m-stamp; \
                 $(MAKE) $(AM_MAKEFLAGS) yat2m-stamp; \
                 rmdir yat2m-lock; \
               else \
                 while test -d yat2m-lock; do sleep 1; done; \
                 test -f yat2m-stamp; exit $$?; \
               fi; \
             fi

dist-hook: defsincdate

defsincdate: $(gnupg_TEXINFOS)
	: >defsincdate ; \
	if test -e $(top_srcdir)/.git; then \
	  (cd $(srcdir) && git log -1 --format='%ct' \
               -- $(gnupg_TEXINFOS) 2>/dev/null) >>defsincdate; \
        elif test x"$$SOURCE_DATE_EPOCH" != x; then   \
	   echo "$$SOURCE_DATE_EPOCH" >>defsincdate ; \
	fi

defs.inc : defsincdate Makefile mkdefsinc
	incd="`test -f defsincdate || echo '$(srcdir)/'`defsincdate"; \
	./mkdefsinc -C $(srcdir) --date "`cat $$incd 2>/dev/null`" \
	    $(gnupg_TEXINFOS) >$@

online: gnupg.html gnupg.pdf gnupg-module-overview.png \
           gnupg-card-architecture.png
	set -e; \
	echo "Uploading current manuals to www.gnupg.org ..."; \
	cp $(srcdir)/gnupg-logo-tr.png gnupg.html/; \
	cp gnupg-module-overview.png gnupg.html/; \
	cp gnupg-card-architecture.png gnupg.html/; \
        user=werner ; webhost="ftp.gnupg.org" ; dashdevel="" ; \
        if echo "@PACKAGE_VERSION@" | grep -- "-beta" >/dev/null; then \
	  dashdevel="-devel" ; \
	else \
          rsync -v gnupg.pdf $${user}@$${webhost}:webspace/manuals/ ; \
        fi ; \
	cd gnupg.html ; \
        rsync -vr --exclude='.git' .  \
	  $${user}@$${webhost}:webspace/manuals/gnupg$${dashdevel}/

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

# Tell GNU make to disable its built-in pattern rules.
%:: %,v
%:: RCS/%,v
%:: RCS/%
%:: s.%
%:: SCCS/s.%
