# Makefile.in generated by automake 1.17 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2024 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Makefile.am - main makefile for GnuPG
#     	Copyright (C) 2001, 2004, 2010 Free Software Foundation, Inc.
#
# This file is part of GnuPG.
#
# GnuPG is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# GnuPG is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see <https://www.gnu.org/licenses/>.

VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
am__rm_f = rm -f $(am__rm_f_notfound)
am__rm_rf = rm -rf $(am__rm_f_notfound)
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
	$(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/gettext.m4 \
	$(top_srcdir)/m4/gpg-error.m4 $(top_srcdir)/m4/iconv.m4 \
	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/ksba.m4 \
	$(top_srcdir)/m4/lcmessage.m4 $(top_srcdir)/m4/ldap.m4 \
	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libassuan.m4 \
	$(top_srcdir)/m4/libgcrypt.m4 $(top_srcdir)/m4/nls.m4 \
	$(top_srcdir)/m4/npth.m4 $(top_srcdir)/m4/ntbtls.m4 \
	$(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \
	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/readline.m4 \
	$(top_srcdir)/m4/socklen.m4 $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps) $(dist_doc_DATA) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/build-aux/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
  || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
       $(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \
  }
am__installdirs = "$(DESTDIR)$(docdir)"
DATA = $(dist_doc_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	cscope distdir distdir-am dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
	config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
DIST_SUBDIRS = m4 common regexp kbx g10 sm agent scd g13 dirmngr tools \
	po doc tests tpm2d
am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
	$(top_srcdir)/build-aux/compile \
	$(top_srcdir)/build-aux/config.guess \
	$(top_srcdir)/build-aux/config.rpath \
	$(top_srcdir)/build-aux/config.sub \
	$(top_srcdir)/build-aux/install-sh \
	$(top_srcdir)/build-aux/missing \
	$(top_srcdir)/build-aux/mkinstalldirs ABOUT-NLS AUTHORS \
	COPYING ChangeLog INSTALL NEWS README THANKS TODO \
	build-aux/compile build-aux/config.guess \
	build-aux/config.rpath build-aux/config.sub build-aux/depcomp \
	build-aux/install-sh build-aux/mdate-sh build-aux/missing \
	build-aux/mkinstalldirs build-aux/texinfo.tex
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -700 -exec chmod u+rwx {} ';' \
      ; rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
GZIP_ENV = -9
DIST_ARCHIVES = $(distdir).tar.bz2
DIST_TARGETS = dist-bzip2
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = \
  find . \( -type f -a \! \
            \( -name .nfs* -o -name .smb* -o -name .__afs* \) \) -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
AWK_HEX_NUMBER_OPTION = @AWK_HEX_NUMBER_OPTION@
BUILD_FILEVERSION = @BUILD_FILEVERSION@
BUILD_HOSTNAME = @BUILD_HOSTNAME@
BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
BUILD_REVISION = @BUILD_REVISION@
BUILD_TIMESTAMP = @BUILD_TIMESTAMP@
BUILD_VERSION = @BUILD_VERSION@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CC_FOR_BUILD = @CC_FOR_BUILD@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DL_LIBS = @DL_LIBS@
DNSLIBS = @DNSLIBS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
ENCFS = @ENCFS@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
FUSERMOUNT = @FUSERMOUNT@
GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
GNUPG_AGENT_PGM = @GNUPG_AGENT_PGM@
GNUPG_DIRMNGR_LDAP_PGM = @GNUPG_DIRMNGR_LDAP_PGM@
GNUPG_DIRMNGR_PGM = @GNUPG_DIRMNGR_PGM@
GNUPG_KEYBOXD_PGM = @GNUPG_KEYBOXD_PGM@
GNUPG_PINENTRY_PGM = @GNUPG_PINENTRY_PGM@
GNUPG_PROTECT_TOOL_PGM = @GNUPG_PROTECT_TOOL_PGM@
GNUPG_SCDAEMON_PGM = @GNUPG_SCDAEMON_PGM@
GNUPG_TPM2DAEMON_PGM = @GNUPG_TPM2DAEMON_PGM@
GPGKEYS_LDAP = @GPGKEYS_LDAP@
GPGRT_CONFIG = @GPGRT_CONFIG@
GPG_ERROR_CFLAGS = @GPG_ERROR_CFLAGS@
GPG_ERROR_CONFIG = @GPG_ERROR_CONFIG@
GPG_ERROR_LIBS = @GPG_ERROR_LIBS@
GPG_ERROR_MT_CFLAGS = @GPG_ERROR_MT_CFLAGS@
GPG_ERROR_MT_LIBS = @GPG_ERROR_MT_LIBS@
HAVE_LIBTSS = @HAVE_LIBTSS@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
KSBA_CFLAGS = @KSBA_CFLAGS@
KSBA_CONFIG = @KSBA_CONFIG@
KSBA_LIBS = @KSBA_LIBS@
LBER_LIBS = @LBER_LIBS@
LDAPLIBS = @LDAPLIBS@
LDAP_CPPFLAGS = @LDAP_CPPFLAGS@
LDFLAGS = @LDFLAGS@
LIBASSUAN_CFLAGS = @LIBASSUAN_CFLAGS@
LIBASSUAN_CONFIG = @LIBASSUAN_CONFIG@
LIBASSUAN_LIBS = @LIBASSUAN_LIBS@
LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@
LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@
LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@
LIBGNUTLS_CFLAGS = @LIBGNUTLS_CFLAGS@
LIBGNUTLS_LIBS = @LIBGNUTLS_LIBS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBREADLINE = @LIBREADLINE@
LIBS = @LIBS@
LIBTSS_CFLAGS = @LIBTSS_CFLAGS@
LIBTSS_LIBS = @LIBTSS_LIBS@
LIBUSB_CPPFLAGS = @LIBUSB_CPPFLAGS@
LIBUSB_LIBS = @LIBUSB_LIBS@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
NETLIBS = @NETLIBS@
NPTH_CFLAGS = @NPTH_CFLAGS@
NPTH_CONFIG = @NPTH_CONFIG@
NPTH_LIBS = @NPTH_LIBS@
NTBTLS_CFLAGS = @NTBTLS_CFLAGS@
NTBTLS_CONFIG = @NTBTLS_CONFIG@
NTBTLS_LIBS = @NTBTLS_LIBS@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_GT = @PACKAGE_GT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
POSUB = @POSUB@
RANLIB = @RANLIB@
SENDMAIL = @SENDMAIL@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SQLITE3_CFLAGS = @SQLITE3_CFLAGS@
SQLITE3_LIBS = @SQLITE3_LIBS@
STRIP = @STRIP@
SWTPM = @SWTPM@
SYSROOT = @SYSROOT@
TPMSERVER = @TPMSERVER@
TSSSTARTUP = @TSSSTARTUP@
TSS_INCLUDE = @TSS_INCLUDE@
USE_C99_CFLAGS = @USE_C99_CFLAGS@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
W32SOCKLIBS = @W32SOCKLIBS@
WINDRES = @WINDRES@
XGETTEXT = @XGETTEXT@
XGETTEXT_015 = @XGETTEXT_015@
XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
YAT2M = @YAT2M@
ZLIBS = @ZLIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__rm_f_notfound = @am__rm_f_notfound@
am__tar = @am__tar@
am__untar = @am__untar@
am__xargs_n = @am__xargs_n@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@

# We want to also build the wixlib for use by GnuPG Desktop
WITH_MSI = 1

# Location of the released tarball archives.  This is prefixed by
# the variable RELEASE_ARCHIVE in ~/.gnupg-autogen.rc.  For example:
# RELEASE_ARCHIVE=user@host:archive/tarballs
RELEASE_ARCHIVE_SUFFIX = gnupg/v2.5
# The variable RELEASE_SIGNKEY in ~/.gnupg-autogen.rc is used
# to specify the key for signing.  For example:
# RELEASE_SIGNKEY=D8692123C4065DEA5E0F3AB5249B39D24F25E3B6

# Autoconf flags.
ACLOCAL_AMFLAGS = -I m4
AM_DISTCHECK_DVI_TARGET = pdf
AM_DISTCHECK_CONFIGURE_FLAGS = --enable-gnupg-builddir-envvar \
  --enable-all-tests --enable-g13 \
  --enable-gpgtar --enable-wks-tools --disable-ntbtls

GITLOG_TO_CHANGELOG = gitlog-to-changelog
EXTRA_DIST = build-aux/config.rpath build-aux/potomo autogen.sh autogen.rc \
	     ChangeLog-2011 po/ChangeLog-2011 build-aux/ChangeLog-2011     \
	     VERSION README.GIT build-aux/gitlog-to-changelog              \
	     COPYING.GPL2 COPYING.LGPL21 COPYING.LGPL3      \
             COPYING.CC0 COPYING.other                      \
	     build-aux/git-log-fix build-aux/git-log-footer \
	     build-aux/getswdb.sh                           \
	     build-aux/speedo.mk                            \
             build-aux/speedo/zlib.pc			    \
             build-aux/speedo/w32/inst-options.ini	    \
             build-aux/speedo/w32/inst.nsi		    \
             build-aux/speedo/w32/pkg-copyright.txt	    \
             build-aux/speedo/w32/g4wihelp.c		    \
             build-aux/speedo/w32/pango.modules		    \
             build-aux/speedo/w32/gdk-pixbuf-loaders.cache  \
             build-aux/speedo/w32/exdll.h		    \
             build-aux/speedo/w32/exdll.c		    \
             build-aux/speedo/w32/README.txt		    \
             build-aux/speedo/w32/gnupg-logo-150x57.bmp	    \
             build-aux/speedo/w32/gnupg-logo-164x314.bmp    \
             build-aux/speedo/w32/wixlib.wxs                \
             build-aux/speedo/patches/atk-1.32.0.patch	    \
             build-aux/speedo/patches/libiconv-1.14.patch   \
             build-aux/speedo/patches/pango-1.29.4.patch    \
             build-aux/speedo/patches/sqlite.patch

DISTCLEANFILES = g10defs.h
@BUILD_GPG_FALSE@gpg = 
@BUILD_GPG_TRUE@gpg = g10
@BUILD_GPGSM_FALSE@sm = 
@BUILD_GPGSM_TRUE@sm = sm
@BUILD_AGENT_FALSE@agent = 
@BUILD_AGENT_TRUE@agent = agent
@BUILD_SCDAEMON_FALSE@scd = 
@BUILD_SCDAEMON_TRUE@scd = scd
@BUILD_G13_FALSE@g13 = 
@BUILD_G13_TRUE@g13 = g13
@BUILD_DIRMNGR_FALSE@dirmngr = 
@BUILD_DIRMNGR_TRUE@dirmngr = dirmngr
@BUILD_DOC_FALSE@doc = 
@BUILD_DOC_TRUE@doc = doc
@DISABLE_TESTS_FALSE@tests = tests
@DISABLE_TESTS_TRUE@tests = 
@BUILD_TPM2D_FALSE@tpm2d = 
@BUILD_TPM2D_TRUE@tpm2d = tpm2d
SUBDIRS = m4 common regexp kbx \
          ${gpg} ${sm} ${agent} ${scd} ${g13} ${dirmngr} \
          tools po ${doc} ${tests} ${tpm2d}

dist_doc_DATA = README
gen_start_date = 2011-12-01T06:00:00
TESTS_ENVIRONMENT = \
	LC_ALL=C \
	EXEEXT=$(EXEEXT) \
	PATH=$(abs_top_builddir)/tests/gpgscm:$(PATH) \
	abs_top_srcdir=$(abs_top_srcdir) \
	objdir=$(abs_top_builddir) \
	GNUPG_BUILD_ROOT="$(abs_top_builddir)" \
	GNUPG_IN_TEST_SUITE=fact \
	GPGSCM_PATH=$(abs_top_srcdir)/tests/gpgscm


# Names of to help the release target.
RELEASE_NAME = $(PACKAGE_TARNAME)-$(PACKAGE_VERSION)
RELEASE_W32_STEM_NAME = $(PACKAGE_TARNAME)-w32-$(PACKAGE_VERSION)
all: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

config.h: stamp-h1
	@test -f $@ || rm -f stamp-h1
	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
	$(AM_V_at)rm -f stamp-h1
	$(AM_V_GEN)cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
	$(AM_V_GEN)($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	$(AM_V_at)rm -f stamp-h1
	$(AM_V_at)touch $@

distclean-hdr:
	-rm -f config.h stamp-h1
install-dist_docDATA: $(dist_doc_DATA)
	@$(NORMAL_INSTALL)
	@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
	done

uninstall-dist_docDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
	test ! -s cscope.files \
	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
	-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) distdir-am

distdir-am: $(DISTFILES)
	$(am__remove_distdir)
	$(AM_V_at)$(MKDIR_P) "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
	$(am__post_remove_distdir)
dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__post_remove_distdir)

dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__post_remove_distdir)

dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__post_remove_distdir)

dist-zstd: distdir
	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
	$(am__post_remove_distdir)

dist-tarZ: distdir
	@echo WARNING: "Support for distribution archives compressed with" \
		       "legacy program 'compress' is deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__post_remove_distdir)

dist-shar: distdir
	@echo WARNING: "Support for shar distribution archives is" \
	               "deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
	$(am__post_remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__post_remove_distdir)

dist dist-all:
	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
	$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  eval GZIP= gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  eval GZIP= gzip -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	*.tar.zst*) \
	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
	esac
	chmod -R a-w $(distdir)
	chmod u+w $(distdir)
	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build/sub \
	  && ../../configure \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	    --srcdir=../.. --prefix="$$dc_install_base" \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__post_remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(DATA) config.h all-local
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(docdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-$(am__rm_f) $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
	-$(am__rm_f) $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
@HAVE_W32_SYSTEM_FALSE@install-data-hook:
clean: clean-recursive

clean-am: clean-generic mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr distclean-local \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-dist_docDATA
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-dist_docDATA

.MAKE: $(am__recursive_targets) all install-am install-data-am \
	install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
	am--refresh check check-am clean clean-cscope clean-generic \
	cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
	dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
	dist-zip dist-zstd distcheck distclean distclean-generic \
	distclean-hdr distclean-local distclean-tags distcleancheck \
	distdir distuninstallcheck dvi dvi-am html html-am info \
	info-am install install-am install-data install-data-am \
	install-data-hook install-dist_docDATA install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	installdirs-am maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
	tags-am uninstall uninstall-am uninstall-dist_docDATA

.PRECIOUS: Makefile


# Create test directory etc/gnupg so that we have an
# empty sysconfdir and bin where we put out gpgconf.ctl.
# we also put symlinks to the actual binaries there.
# Unfortunately there is no all-hook, but symlinks have the
# nice property that they can be created even for not yet
# created files.
all-local:
	@-$(MKDIR_P) bin etc/gnupg libexec
	@cat $(srcdir)/tests/gpgconf.ctl.in > bin/gpgconf.ctl
	(set -e; cd bin; \
	 for i in gpg gpgv; \
	     do ln -sf ../g10/$$i$(EXEEXT) .; done; \
	 for i in gpgsm; \
	     do ln -sf ../sm/$$i$(EXEEXT) .; done; \
	 for i in gpg-agent; \
	     do ln -sf ../agent/$$i$(EXEEXT) .; done; \
	 for i in dirmngr; \
	     do ln -sf ../dirmngr/$$i$(EXEEXT) .; done; \
	 for i in gpgconf gpg-connect-agent gpgtar gpg-card; \
	     do ln -sf ../tools/$$i$(EXEEXT) .; done; \
	 cd ../libexec ; \
	 for i in keyboxd; \
	     do ln -sf ../kbx/$$i$(EXEEXT) .; done; \
	 for i in scdaemon; \
	     do ln -sf ../scd/$$i$(EXEEXT) .; done; \
	 for i in gpg-preset-passphrase; \
	     do ln -sf ../agent/$$i$(EXEEXT) .; done; \
	 for i in tpm2daemon; \
             do [ -f ../tpm2d/$$i$(EXEEXT) ] && ln -sf ../tpm2d/$$i$(EXEEXT) .; done; \
	 echo "created links to binaries" )

# Clean up our test directories but take care that this is never
# called from / or /usr/local
distclean-local:
	@if pwd | grep gnupg 2>/dev/null; then rm -rf etc bin libexec; fi

dist-hook: gen-ChangeLog

distcheck-hook:
	set -e; ( \
	pref="#+macro: gnupg26_" ;\
	reldate="$$(date -u +%Y-%m-%d)" ;\
        echo "$${pref}ver  $(PACKAGE_VERSION)"  ;\
        echo "$${pref}date $${reldate}" ;\
        list='$(DIST_ARCHIVES)'; for i in $$list; do \
	  case "$$i" in *.tar.bz2) \
            echo "$${pref}size $$(wc -c <$$i|awk '{print int($$1/1024)}')k" ;\
	    echo "$${pref}sha1 $$(sha1sum <$$i|cut -d' ' -f1)" ;\
	    echo "$${pref}sha2 $$(sha256sum <$$i|cut -d' ' -f1)" ;;\
	  esac;\
	done ) | tee $(distdir).swdb

@HAVE_W32_SYSTEM_TRUE@install-data-hook:
@HAVE_W32_SYSTEM_TRUE@	set -e; \
@HAVE_W32_SYSTEM_TRUE@	for i in $$($(top_srcdir)/build-aux/potomo \
@HAVE_W32_SYSTEM_TRUE@                     --get-linguas $(top_srcdir)/po) ; do \
@HAVE_W32_SYSTEM_TRUE@           $(MKDIR_P) "$(DESTDIR)$(localedir)/$$i/LC_MESSAGES" || true; \
@HAVE_W32_SYSTEM_TRUE@           rm -f "$(DESTDIR)$(localedir)/$$i/LC_MESSAGES/gnupg2.mo" \
@HAVE_W32_SYSTEM_TRUE@                                                 2>/dev/null || true; \
@HAVE_W32_SYSTEM_TRUE@           $(top_srcdir)/build-aux/potomo $(top_srcdir)/po/$$i.po \
@HAVE_W32_SYSTEM_TRUE@              "$(DESTDIR)$(localedir)/$$i/LC_MESSAGES/gnupg2.mo" ; \
@HAVE_W32_SYSTEM_TRUE@	done
.PHONY: gen-ChangeLog stowinstall speedo
gen-ChangeLog:
	if test -e $(top_srcdir)/.git; then				\
	  (cd $(top_srcdir) &&                      			\
	    $(GITLOG_TO_CHANGELOG) --append-dot --tear-off		\
	    --amend=build-aux/git-log-fix 				\
	    --since=$(gen_start_date) ) > $(distdir)/cl-t;		\
          cat $(top_srcdir)/build-aux/git-log-footer >> $(distdir)/cl-t;  \
	  rm -f $(distdir)/ChangeLog;					\
	  mv $(distdir)/cl-t $(distdir)/ChangeLog;			\
	fi

stowinstall:
	$(MAKE) $(AM_MAKEFLAGS) install prefix=/usr/local/stow/gnupg

speedo:
	$(MAKE) -f $(top_srcdir)/build-aux/speedo.mk native SELFCHECK=0

.PHONY: check-all release sign-release
check-all:
	$(TESTS_ENVIRONMENT) \
	  $(abs_top_builddir)/tests/gpgscm/gpgscm$(EXEEXT) \
	  $(abs_srcdir)/tests/run-tests.scm $(TESTFLAGS) $(TESTS)

release:
	+(set -e;\
	 if [ "$(abs_top_builddir)" = "$(abs_top_srcdir)" ]; then \
           echo "error: build directory must not be the source directory" >&2;\
	   exit 2;\
         fi ;\
	 echo "/* Build started at $$(date -uIseconds) */" ;\
	 [ -n "$(WITH_MSI)" ] && echo "/* (with MSI build support) */" ;\
	 cd $(top_srcdir); \
	 ./autogen.sh --force; \
	 cd $(abs_top_builddir); \
	 rm -rf dist; mkdir dist ; cd dist ; \
         mkopt=""; \
	 if [ -n "$$CUSTOM_SWDB" ]; then \
            mkopt="CUSTOM_SWB=1"; \
	    x=$$(grep '^[[:blank:]]*OVERRIDE_TARBALLS[[:blank:]]*=' \
                 $$HOME/.gnupg-autogen.rc|cut -d= -f2|xargs);\
	    if [ -f "$$x/swdb.lst" ]; then \
	      echo "/* Copying swdb.lst from the overrides directory */"; \
              cp "$$x/swdb.lst" . ; \
              cp "$$x/swdb.lst.sig" . ; \
	    fi; \
	 fi; \
	 echo "/* Running configure */";\
	 $(abs_top_srcdir)/configure --enable-maintainer-mode; \
	 echo "/* Running make distcheck */";\
	 $(MAKE) distcheck TESTFLAGS=--parallel; \
	 echo "/* Unpacking release */";\
	 $(AMTAR) xjf $(RELEASE_NAME).tar.bz2 ;\
	 target=w32-release ;\
	 [ -n "$(WITH_MSI)" ] && target=w32-msi-release ;\
	 echo "/* Running $(MAKE) -f  $(RELEASE_NAME)/build-aux/speedo.mk $${target} */";\
	 $(MAKE) -f  $(RELEASE_NAME)/build-aux/speedo.mk $${target} ;\
	 echo "/* Build finished at $$(date -uIseconds) */" ;\
	 echo "/*" ;\
	 echo " * Please run the final step interactively:" ;\
	 echo " *   make sign-release $${WITH_MSI:+WITH_MSI=1}" ;\
	 echo " */" ;\
	) 2>&1 | tee "$(RELEASE_NAME).buildlog"

sign-release:
	 +(set -e; \
	  test $$(pwd | sed 's,.*/,,') = dist || cd dist; \
	  x=$$(grep '^[[:blank:]]*RELEASE_ARCHIVE[[:blank:]]*=' \
                    $$HOME/.gnupg-autogen.rc|cut -d= -f2|xargs);\
          if [ -z "$$x" ]; then \
             echo "error: RELEASE_ARCHIVE missing in ~/.gnupg-autogen.rc">&2; \
             exit 2;\
          fi;\
          myarchive="$$x/$(RELEASE_ARCHIVE_SUFFIX)";\
	  x=$$(grep '^[[:blank:]]*RELEASE_SIGNKEY[[:blank:]]*=' \
                     $$HOME/.gnupg-autogen.rc|cut -d= -f2|xargs);\
          if [ -z "$$x" ]; then \
             echo "error: RELEASE_SIGNKEY missing in ~/.gnupg-autogen.rc">&2; \
             exit 2;\
          fi;\
	  mysignkey="$$x";\
	  release_w32_name="$(RELEASE_W32_STEM_NAME)_$$(date -u +%Y%m%d)" ;\
	  files1="$(RELEASE_NAME).tar.bz2 \
                  $${release_w32_name}.tar.xz \
                  $${release_w32_name}.exe" ;\
	  files2="$(RELEASE_NAME).tar.bz2.sig \
		  $(RELEASE_NAME).swdb \
		  $(RELEASE_NAME).buildlog \
		  $${release_w32_name}.tar.xz.sig \
		  $${release_w32_name}.exe.sig    \
		  $${release_w32_name}.exe.swdb" ;\
          wixlibfile="$${release_w32_name}.wixlib";\
	  $(MAKE) -f $(RELEASE_NAME)/build-aux/speedo.mk w32-sign-installer ;\
	  echo "/* Signing the source tarball ..." ;\
	  gpg -sbu $$mysignkey $(RELEASE_NAME).tar.bz2 ;\
	  echo "/* Signing the W32 source tarball ..." ;\
	  gpg -sbu $$mysignkey $${release_w32_name}.tar.xz ;\
	  echo "/* Signing the W32 installer ..." ;\
	  gpg -sbu $$mysignkey $${release_w32_name}.exe ;\
          if [ -e $${wixlibfile} ]; then \
	      echo "/* Signing the Wixlib ..." ;\
	      gpg -sbu $$mysignkey $${wixlibfile} ;\
	  fi; \
	  cat $(RELEASE_NAME).swdb >swdb.snippet;\
	  echo '#+macro: gnupg26_branch  master' >>swdb.snippet;\
	  cat  $${release_w32_name}.exe.swdb >>swdb.snippet;\
	  echo "#+macro: gnupg26_w32_ssiz $$(wc -c <$${release_w32_name}.tar.xz|awk '{print int($$1/1024)}')k" >>swdb.snippet ;\
	  echo >>swdb.snippet ;\
	  sha1sum $${files1} >>swdb.snippet ;\
          cat "../$(RELEASE_NAME).buildlog" swdb.snippet \
               | gzip >$(RELEASE_NAME).buildlog ;\
          echo "Release created - copying it to the archive ..." ;\
	  scp -p $${files1} $${files2} $$myarchive/ \
	    || echo "/* Error copying files to the archive - ignored */" ;\
	  if [ -e $${wixlibfile} ]; then\
	    scp -p $${wixlibfile} $${wixlibfile}.sig $$myarchive/ \
	      || echo "/* Error copying wixlib to the archive - ignored. */" ;\
          fi ;\
	  echo '/*' ;\
	  echo ' * All done; for checksums see dist/swdb.snippet' ;\
	  echo ' */' ;\
         )

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

# Tell GNU make to disable its built-in pattern rules.
%:: %,v
%:: RCS/%,v
%:: RCS/%
%:: s.%
%:: SCCS/s.%
